How to restore a backup to a fresh 1100 / 1200
Background
If you ever need to replace a 1100 / 1200 with new hardware, or reimage the same hardware to a new state, you can use the following procedure to make the new machine behave exactly like the old machine.
Backup
Perform a backup in the SMC. This process is described in vACS Backup and Restore.pdf Save the backup file to a thumbdrive. The backup is stored in c:\inetpub\wwwroot\bak
New Machine Preparation
- Boot new hardware. Run first run wizard. Set to 1100 or 1200 as appropriate.
- Use the licensing utility to apply the correct license. (Or Contact your IED representative for a valid license.)
- Set the IP address for the machine.
- Using ASIControl, set the IP address for the soundcard.
- Use GlobalCom package files as necessary to bring the image up to date.
Restore
Perform a restore. This is documented in the link above. Choose the .vbk file saved during the backup process. Reboot the vACS. Verify that the vacs settings are correct.
